Solid concrete blockwork
Showing results 1-7 of 7
Concrete blockwork – efflorescence
-
Moisture in the blocks causing salts to migrate to the surface leaving a whitish-grey residue
Concrete blockwork – cracks in the mortar and/or blocks
-
No control joints incorporated in wall
-
Differential settlement of the building caused by swelling/shrinking of clay soils and inadequate foundations and indicated by cracking through the mortar stepped across the face of the wall
-
Building subjected to vibration movement such as earthquake, high wind
-
Wall unreinforced
Concrete blockwork – peeling or flaking of paint
-
UV deterioration
-
Loss of adhesion due to excess moisture in substrate
-
Poor initial substrate preparation
-
Oil-based (alkyd) paint applied over water-based (acrylic) paint
-
Surface was damp or dirty when painted previously
-
Dark colours
-
Paint coating at the end of its serviceable life
Concrete blockwork – bubbling or blistering of paint
-
Loss of adhesion due to excess moisture in substrate
-
Poor initial substrate preparation
-
Oil-based (alkyd) paint applied over water-based (latex) paint
-
Surface was damp or dirty when painted previously
-
Dark colours increasing surface temperatures
-
Water-based paint coat exposed to moisture before paint has fully dried
Concrete blockwork – uneven colouring/staining across wall
-
Localised water run-off across the face of the wall
-
Lack of rain washing
Concrete blockwork – drummy plaster
-
Loss of bond between the plaster and the concrete
Concrete blockwork – leaking through cladding
-
Cracks in the concrete block
-
Paint or sealant failure
-
Junctions with other claddings and/or roof poorly detailed/constructed
-
Moisture absorption through the masonry when left unpainted