Showing results 373-381 of 381

Resin appearing on surface of timber weatherboards

  • Preservative treatment solvents causing resin bleeding in the timber, particularly pinus radiata timber where the treatment is light organic solvent preservative-treated (LOSP) 

    How to repair

  • Changes of temperature of timber, particularly where darker-coloured paint finishes have been used

    How to repair

Fibre-cement cladding – peeling or flaking paint

Timber cladding trim – paint failure

  • Timber swelling/shrinkage caused by moisture absorption into timber end grain if joints were not adequately primed before installation

    How to repair

  • Coating is at end of serviceable life

    How to repair

Fibre-cement cladding – bubbling or blistering paint

  • Loss of adhesion due to excess moisture in substrate

    How to repair

  • Poor initial substrate preparation

    How to repair

  • View all repairs

Fibre-cement cladding – paint failure at base of walls

Texture-coated fibre-cement cladding – paint failure at base of walls

  • Cladding covered by soil/foliage

    How to repair

  • The cladding is too close to the ground, not sealed and absorbing moisture

    How to repair

  • View all repairs

Leaking through texture-coated fibre-cement cladding

Chalking paint on asbestos-cement cladding

  • Weathering, UV light exposure – chalking will be more visible with darker colours

    How to repair

Fading paint on asbestos-cement cladding

  • Weathering/UV light exposure – darker colours are more prone to fading

    How to repair