Showing results 49-60 of 310

Stained or clear-finished timber weatherboards too close to ground

Staining around nail holes in timber weatherboards

  • Rust staining from mild steel or hot-dip galvanised nails 

    How to repair

  • Staining from hot-dip galvanised, copper or aluminium nails in cedar (typically a teardrop-shaped stain)

    How to repair

Rot in stained or clear-finished timber weatherboards

  • Coating failure

    How to repair

  • Timber is or has been continuously damp

    How to repair

  • View all repairs

Rot at base of stained or clear-finished timber weatherboard walls

Plywood cladding – surface checking

Plywood cladding – delamination

Plywood cladding – staining around nail holes

  • Rust staining from mild steel or hot-dip galvanised nails 

    How to repair

Plywood cladding – chalking paint

  • Weathering, UV light exposure – chalking will be more visible with darker colours

    How to repair

Plywood cladding – fading paint

  • Weathering UV light exposure – darker colours are more prone to fading 

    How to repair

Plywood cladding – peeling or flaking paint/stain

Plywood cladding – bubbling or blistering paint/stain

  • A loss of adhesion due to excess moisture in the substrate

    How to repair

  • Poor initial substrate preparation

    How to repair

  • View all repairs

Plywood cladding – paint failure at base of walls

  • Cladding covered by soil/foliage

    How to repair

  • The back surface of boards too close to the ground, not sealed and absorbing moisture

    How to repair

  • View all repairs