Showing results 1-12 of 16

Framing outline is visible on the cladding on cold mornings

  • Condensation is forming on cladding where there is insufficient or no insulation – when walls are uninsulated or have insufficient insulation, the area of cladding between the wall framing may become colder than where the cladding is fixed to the framing resulting in condensation forming on the cladding in a pattern. 

    How to repair

  • Condensation forming at the framing locations when the wall is well insulated - this means that, due to thermal bridging, the framing is colder at the framing locations than where there is no framing, so moisture condenses at the framing locations 

    How to repair

Texture-coated fibre-cement – vertical cracking at sheet joints

Texture-coated fibre-cement – horizontal cracking

Stucco – horizontal or diagonal surface cracking

Hairline cracking in EIFS

Timber slat decks – deterioration of decking/cladding

Timber slat decks – water leaking into house

  • Water is tracking along the bolts used to fix the deck to the wall cladding/framing

    How to repair

  • The decking/framing is hard against wall cladding

    How to repair

  • View all repairs

Interior musty smells

  • There is a high level of moisture in the rooms due to a combination of poor ventilation, not enough heating, and/or poor insulation

    How to repair

  • Dampness from the subfloor is getting into the rooms through gaps in the flooring and through service holes cut in framing

    How to repair

  • View all repairs

Wall framing location is visible

  • Condensation forming on the areas between the framing because the wall is not insulated – mould growth is the result of regular condensation

    How to repair

  • Mould is forming on the framing locations because a thermal bridge (framing has lower thermal performance than the insulated part of the wall)

    How to repair

Plasterboard linings – cracking

Glass block cracking in mortar joints

  • There is insufficient allowance for structural movement around the glass block panel

    How to repair

  • Wall has inadequate strengthening to withstand the imposed structural loading 

    How to repair

  • View all repairs

Concrete or clay tiles – roof sagging