Timber cladding trim – paint failure
Listed under: Exterior, timber and wood-based, timber, cladding, walls, timber trims
Cause
Timber swelling/shrinkage caused by moisture absorption into timber end grain if joints were not adequately primed before installation
Repair
- scrape and/or sand off loose paint; sand bare timber until surface is sound; prime; fill joints with putty or exterior grade flexible (polyester) filler; paint with a minimum two coats of semi-gloss or high gloss acrylic paint
Cause
Coating is at end of serviceable life
Repair
- scrape and/or sand off loose paint; sand bare timber until surface is sound; prime; fill joints with putty or exterior grade flexible (polyester) filler; paint with a minimum two coats of semi-gloss or high gloss acrylic paint