Seam separation/failure of torch-on bitumen roofing membrane
Separation or failure of seams on torch-on modified bitumen roofing membrane can result in loss of weathertight protection and should be attended to without delay
Causes
Listed under: membranes, Roof, cladding, roof cladding
Cause
Inadequate heat applied during installation
Repair
-
replacement/repair of roofing membranes should be carried out by specialists – this is typically a requirement of the membrane manufacturer. This is not DIY work. Work on roofs is restricted building work under the Building Act and anyone engaged to carry out this work must be a licensed building practitioner or be supervised by an LBP
-
after repair or replacement, check over the roof once a year to ensure it is in sound condition
Cause
Expansion/contraction of the membrane
Repair
- as for the repair above